Perawatan mesin industri menjadi fokus utama untuk mencegah gangguan dan kerusakan yang dapat merugikan. Dengan pemahaman mendalam tentang teknik monitoring, peserta pelatihan diharapkan dapat mengidentifikasi potensi masalah sejak dini dan menerapkan langkah-langkah pencegahan yang tepat. Selain itu, keahlian dalam memilih teknik monitoring kondisi mesin menjadi kunci dalam memastikan efektivitas perawatan yang dilakukan. Pelatihan ini dirancang untuk memberikan pengetahuan yang komprehensif bagi peserta agar dapat menjadi ahli dalam melaksanakan monitoring kondisi mesin.

Tujuan Training Troubleshooting, Inspection, And Monitoring of Machinery

Setelah  mengikuti pelatihan ini peserta diharapkan akan memiliki :
1.Pemahaman tentang pengetahuan teknik monitoring dan memilih teknik monitoring kondisi mesin.
2.Keahlian dalam melakukan monitoring kondisi mesin.

Materi Training Troubleshooting, Inspection, And Monitoring Of Machinery
1.Teknik monitoring kondisi mesin
2.Pemilihan teknik monitoring kondisi mesin
3.Inspeksi dan monitoring visual
4.Inspeksi, monitoring, dan analisis pelumas
5.Inspeksi, monitoring, dan analisis getaran
6.Analisis spektrum getaran
7.Inspeksi dan monitoring geometrik
8.Analisis levelling, run out, and misalignment

Peserta Training Troubleshooting, Inspection, And Monitoring Of Machinery
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang inspeksi dan monitoring kondisi mesin pada industri manufaktur

Instruktur Training Troubleshooting, Inspection, And Monitoring Of Machinery
H. Joko Winarno, ST., M.Eng

Time & Venue Training Troubleshooting, Inspection, And Monitoring Of Machinery
TANGGAL  :

• Januari
• Februari
• Maret
• April
• Mei
• Juni
• Juli
• Agustus
• September
• Oktober
• November
• Desember

WAKTU      : 08.00 – 16.00
TEMPAT     : Yogyakarta/Bandung/Jakarta/Surabaya

CONTACT PERSON
Email: nurma@centragama.com
Mobile Phone/WhatsApp: 0813-8142-1802

The post Troubleshooting, Inspection, And Monitoring of Machinery appeared first on .

1. Perlindungan Terhadap Hubung Singkat dan Arus Lebih: Melibatkan perlindungan terhadap hubung singkat (short circuit, sc) atau arus lebih (overcurrent, oc) yang dapat terjadi pada saluran atau peralatan. Perlindungan ini bertujuan untuk mencegah kerusakan yang dapat timbul akibat arus yang berlebihan.
2. Perlindungan Terhadap Gangguan Petir: Dikenal sebagai perlindungan terhadap tegangan lebih (overvoltage), fokusnya adalah melindungi sistem distribusi dari gangguan petir yang dapat menyebabkan lonjakan tegangan berlebih.

Dalam rangka pelatihan ini, akan dibahas berbagai teknik proteksi untuk sistem distribusi. Pembahasan mencakup aspek perencanaan, teknis, aplikasi, dan penyelesaian masalah troubleshooting yang sering terjadi dalam sistem distribusi. Dengan demikian, peserta pelatihan diharapkan dapat memahami serta mengimplementasikan perlindungan secara efektif, menjaga keandalan sistem distribusi, dan meningkatkan efisiensi pelayanan.

Tujuan Training Electrical Distribution

Setelah mengikuti pelatihan Electrical Distribution, peserta diharapkan mampu :

• Memahami sistem proteksi pada sistem distribusi listrik
• Merancang sistem proteksi yang dibutuhkan untuk pengamanan sistem distrisbusi yang ada
• Melakukan analisis dan troubleshooting permasalahan pengamanan dalam sistem distribusi.

Materi Training Electrical Distribution

Berikut adalah ringkasan materi pelatihan

1. Pengantar Electrical Distribution and Circuit Protection
2. Calculation of Short-Circuit Currents
3. Classification and Function of Relays
4. Current and Voltage Transformers
5. Transformer Protection
6. Overcurrent Protection.
7. Fuses
8. Reclosers and Sectionalisers.
9. Directional Overcurrent Relays
10. Differential Protection.
11. Distance Protection
12. Protection of Industrial Systems
13. Industrial Plant Load Shedding
14. Protection Schemes and Substation Design Diagrams.
15. Processing Alarms.
16. Installation,
17. Testing and Maintenance of Protection Systems
18. Case Studies

Peserta Training Electrical Distribution

Pelatihan ini sangat sesuai diikuti oleh para operator, teknisi, engineer, perancang, penyelia, manajer, dan lain-lainnya dari perusahaan pembangkitan, penyaluran maupun divisi-divisi yang menangani kehandalan sistem kelistrikan di perusahaan pemakai energi listrik

INSTRUKTUR

Miftakhul Huda, ST., MT dan Muhammad Ali, ST

(Pakar dan Praktisi di bidang Electrical Distribution System Protection)

WAKTU DAN TEMPAT

Reguler Training :

Hotel Grand Aston Yogyakarta

08.00 s.d 16.00 WIB

FASILITAS

• Modul dan Softcopy Materi
• Sertifikat dari Centra Gama
• Souvenir
• Antar jemput dari Bandara / Stasiun
• Transportasi lokal selama pelatihan
• 2x coffee break and lunchTraining kit
• Training Kit

INVESTASI

Yogyakarta : Rp. 5.800.000 / participant (non residential)

Exclude Pajak

INFORMASI DAN PENDAFTARAN
Nurma
Email: nurma@centragama.com
Mobile Phone/WhatsApp: 0813-8142-1802

PT. CENTRAGAMA INDOVISI

Alamat Kantor : Jl Patangpuluhan No 26 Yogyakarta
Telp : ( 0274 ) 375 734
Fax  : ( 0274 ) 375 734
Email : infotraining@centragama.com
Website : https://centragama.com

The post ELECTRICAL DISTRIBUTION (OPERATION, TESTING and PROTECTION) appeared first on .

Tujuan Electro Technical Officer

Setelah mengikuti training ini diharapkan peserta dapat memahami tanggung jawab sebagai seorang Electro Technical Officer.

Peserta Electro Technical Officer

Pelatihan ini diberikan pada para teknisi, operator maupun supervisor yang bekerja dibidang ketenaga listrikan di industri terutama dibidang pembangkitan dan distribusi tenaga listrik.

Materi Electro Technical Officer

1. Mathematics for Electrical Engineer
2. Applications of Power Electronics
3. Electrical & Electronic Principles & Systems
4. Engineering Science
5. Marine & Business Management for ETO’s
6. Electronic Control Principles
7. Operation & Maintenance of Electrical Plant
8. Marine Navigation System Fault Diagnosis
9. Radio Communications
10. Marine Navigation Systems

Metode

• Presentation
• Discussion
• Case Study
• Evaluation
• Pre-Test & Post-Test

Instruktur

Tugino ST, MT. and team

Time & Venue

TANGGAL  :

• 15 – 17 Januari (tentative)
• 12 – 14 Februari (tentative)
• 12 – 14 Maret (tentative)
• 09 – 11 April (tentative)
• 14 – 16 Mei (tentative)
• 18 – 20 Juni (tentative)
• 16 – 18 Juli (tentative)
• 06 – 08 Agustus (tentative)
• 03 – 05 September (tentative)
• 08 – 10 Oktober (tentative)
• 12 – 14 November (tentative)
• 03 – 05 Desember (tentative)

WAKTU      : 08.00 – 16.00
TEMPAT     : Hotel Ibis Style Yogyakarta, Hotel Amaris Tendean Jakarta, Hotel Golden Flower Bandung

Fasilitas

• Convinience Meeting room
• Souvenir
• Certified
• Transportation during training
• 2x coffee break and lunch during training
• Training kit

Course Fee

Rp. 6.000.000/ participant (non residential)
Special Rate Buy 3 Get 1 freee

PERUSAHAAN MEMBUTUHKAN PELAKSANAAN INHOUSE TRAINING?

SILAHKAN KOMUNIKAN KEPADA KAMI. KAMI AKAN MEMBERIKAN PENAWARAN TERBAIK KAMI.

Pembayaran dapat dilaksanakan pada saat pelatihan atau transfer pada rekening berikut:

PT Bank Mandiri

Branch Yogyakarta KHA Dahlan

Acc. No.  137-00-0626356-6

a/n PT Centra Gama Indovisi

Informasi dan Pendaftaran Pelatihan

0813-8142-1802 (Mobile Phone/WhatsApp)

nurma@centragama.com

The post Electro Technical Officer (ETO) appeared first on .

Tujuan Pelatihan / Training Pengendalian Motor Listrik Secara Elektronik

• Peserta memahami prinsip operasi pengendalian kecepatan motor
• Peserta dapat melakukan troble shooting pada pengendalian kecepatan motor

Materi Pelatihan / Training Pengendalian Motor Listrik Secara Elektronik

1. Pendahuluan
2. OP – AMP Application
3. Power semi conductor component
4. Pengujian komponen semikonduktor
5. Rangkaian penyulut Thyristor
6. PWM Generator
7. AC – DC Converter
8. Speed control of DC motor
9. DC Motor drive
10. Trouble shooting on DC motor drive
11. DC – AC Converter
12. Speed control of induction motor
13. AC Motor drives
14. Trouble shooting on AC Motor drive

Peserta Training Pengendalian Motor Listrik Secara Elektronik

• Electrical & Mechanical Engineer / Supervisor
• Instrument Engineer / Supervisor
• Plant Maintenance / Operators / Supervisor / Superintendent

Metode Training Pengendalian Motor Listrik Secara Elektronik

• Presentation
• Discussion
• Case Study
• Evaluation

Instruktur Training Pengendalian Motor Secara Elektronik

Miftakhul Hudha, S.T, M.Eng and Team

Waktu Training Pengendalian Motor Secara Elektronik

Tanggal    : 

• Januari
• Februari
• Maret
• April
• Mei
• Juni
• Juli
• Agustus
• September
• Oktober
• November
• Desember

Tempat     : Yogyakarta / Bandung / Jakarta

Waktu       : 08.00 sd 16.00 WIB

Fasilitas Training Pengendalian Motor Secara Elektronik

• Convinience Meeting room
• Souvenir
• Sertifikat Pelatihan
• 2x coffee break and lunch during training
• Training Kit

PERUSAHAAN ANDA MEMBUTUHKAN PELATIHAN INHOUSE?

SILAHKAN KOMUNIKASIKAN KEPADA KAMI, UNTUK MENDAPATKAN PENAWARAN TERBAIK KAMI.

Informasi dan Pendaftaran Training Pengendalian Motor Secara Elektronik Hubungi:

Nurma

Email: nurma@centragama.com

Mobile Phone / WhatsApp: 0813-8142-1802

PT. CENTRA GAMA INDOVISI

Alamat Kantor : Jl. Patangpuluhan No 26 Yogyakarta
Telp : ( 0274 ) 375 734
Fax  : ( 0274 ) 375 734
Email : infotraining@centragama.com
Website : https://centragama.com

The post Pengendalian Motor Listrik Secara Elektronik appeared first on .

Tujuan Training Generator Operation

Setelah mengikuti pelatihan ini diharapkan peserta akan memiliki:

• Pemahaman dan pengetahuan mengenai operasi generator dan turbin uap
• Keahlian dalam melalukan perawatan & troubleshooting pada generator & turbin uap

Materi Training Generator Operation

1. Prinsip dasar generator
   • Distribusi fluks pada sela udara
   • Ggl tanpa beban
   • Belitan stator/rotor
   • Isolasi dan kenaikan temperatur
   • Reaksi jangkar
   • Reaktansi
2. Gas turbine engines
   • Gas turbine engine classifications,
   • Principles of operation ,
   • fuel system ,
   • Cooling system,
   • Lubrication system,
   • Starting system
3. Governor
   • System and Component,
   • Governing Fundamentals,
   • Principle of Operation
4. Prime Movers Maintenance
5. Electrical Power Generator
   • Construction,
   • Principles of operation,
   • Generator Characteristics
6. Excitation system
   • Types of exciters,
   • Characteristics of exciters,
   • Field flashing,
   • AVR system
7. Generator Operation
   • Synchronizing to Busbar,
   • Loading,
   • Generator protection
8. Insulation Testing
   • Factors Affecting Insulations,
   • Resistance Testing,
   • Power Factor Testing,
   • High Potential Testing,
   • Withstand  Voltage Testing
9. Generator Testing and Maintenance
   • Stator and Rotor Insulation Test,
   • Stator winding Test,
   • Rotor Voltage Test,
   • Data Interpretation
10. Discussion and cases study

Peserta
Kursus ini dapat diikuti oleh teknisi, engineer, supervisor yang bekerja pada bidang maintenance dan operation Generator untuk berbagai macam industri.

Instruktur Training Operation, Maintenance And Troubleshooting
Ir. Teguh Santosa
(Pakar dan Praktisi di bidang Generator Listrik)

Time & Venue
TANGGAL  :

• Januari
• Februari
• Maret
• April
• Mei’Juni
• Juli
• Agustus
• September
• Oktober
• November
• Desember

WAKTU      : 08.00 – 16.00
TEMPAT     : Hotel Ibis Style Yogyakarta

Facilities

1. Training Modul Pelatihan (Hard copy dan soft copy)
2. Sertifikat
3. Training Kit
4. Souvenir
5. Dua kali Cofee break dan lunch
6. Qualified instructor
7. Pelayanan antar jemput
8. Training Photo
9. Stationeries: NoteBook and Ballpoin

CONTACT PERSON

Email: nurma@centragama.com

Mobile Phone/WhatsApp: 0813-8142-1802

The post Training Generator : Operation, Maintenance And Troubleshooting appeared first on .

Tujuan Pelatihan Mekatronika

1. Pemahaman tentang prinsip kerja dari beberapa aktuator mekanik dan elektrik (silinder pneumatik, silinder hidrolik, motor steper dan solenoid), prinsip pengontrolan secara mekanik, elektrik, dan programmable, pemrograman dan kontrol otomatis dengan menggunakan PLC.
2. Keahlian dalam melakukan indiviual test, troubleshooting dan commissioning dari sistem kontrol otomatis.

Materi Pelatihan Mekatronika

1. Struktur dari Sistem

Mekatronika, struktur hardware dari sistem, kontrol desentral (4 PLC), sistem komunikasi (I/O-comm), penjelasan tentang fungsi dari modul, penjelasan tentang aliran material.

2. Teat Individu dan Comissioning

• komisioning
• penyetelan reed switch dan sensor
• stel elemen mekanik
• penyetelan aktuator pneumatik
• deskripsi dari hubungan kabel
• pelepasan hubungan kabel pada modul PLC
• komisioning dari sistem.

3. Pemograman

• Dasar elektronika digital
• Fungsi dari katup pneumatik
• Pemrograman dengan bahasa function block diagram (FBD), statement list (STL), dan ladder diagram

4. Struktur PLC

Kegunaan CP-342-5 (WINCC-network), data teknis dari PLC S7 CPU 314 IFM, definisi hardware (with STEP 7)

5. Struktur Program

• Penjelasan tentang organization block (OB), dan function (FC)
• Pemrograman OB dan FC, test program pada module

Metode Pelatihan Mekatronika

1. Pre Test
2. Presentasi
3. Diskusi
4. Studi kasus
5. Praktek
6. Post Test
7. Evaluasi

Peserta Pelatihan Mekatronika

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang otomatisasi industri pada industri manufaktur dan industri minyak

Instructor 

Mifhtakhul Hudha ST M.Eng Team

Waktu  dan Tempat

Durasi       : 

15 – 17 Januari 2019
12 – 14 Februari 2019
12 – 14 Maret 2019
09 – 11 April 2019
14 – 16 Mei 2019
18 – 20 Juni 2019
16 – 18 Juli 2019
06 – 08 Agustus 2019
03 – 05 September 2019
08 – 10 Oktober 2019
12 – 14 November 2019
03 – 05 Desember 2019

Tempat     : Hotel Cavinton Yogyakarta

Waktu       : 08.00 sd 16.00 Wib

Facilities

• Souvenir
• Module Hardcopy & Softcopy
• Certified Centra Gama Indovisi
• Training kit
• 2x Coffee Break and lunch
• Pickup Services

Course Fee

Rp. 6.500.000 / participant (non residential), minimal 3 peserta

Diskon 5% untuk pengiriman minimal 3 peserta

Payment due at registration or transfer to account :

PT Bank Mandiri Branch Yogyakarta KHA Dahlan Acc. No.  137-00-0626356-6 a/n PT Centra Gama Indovisi

Informasi dan Pendaftaran

Arum Handayani

arum@centragama.com

0852-3377-1983 (Mobile Phone/WhatsApp)

Nurmasita

nurma@centragama.com

0813-8142-1802 (Mobile Phone/WhatsApp)

Head Office  : Jl. Patangpuluhan 26 Yogyakarta
Telephone : (0274) 375734,
Fax : (0274) 375734
E-mail : infotraining@centragama.com

The post Pelatihan Mekatronika appeared first on .

The course deals with different types of protection schemes used in large networks and those adopted in industrial plants. It describes some of the important components such as relays, comparators and other protective gears, and techniques and calculations used for their settings. This Electric Power System Protection Training Program also reflects on recent development and what are new in this important field of electricity industry.

Electric Power System Protection Training Objectives

The following sees the benefits from this course:

1. On organizational level

• It introduces the subject of protection as an art where technical and economical constraints are to be met and compromised to achieve certain engineering requirements.
• Learn to develop and manage well-protected plants that lead to a higher security, less outages and hence better profitability.
•The course introduces new technologies used in relaying systems such as microprocessor and computer relaying which put organizations at the forefront of modern electricity industries.
• Helps organizations in making appropriate decisions at times of system expansion or in situations where new developments become necessary.
• Help organizations to understand causes of system failures, means available for remedies and hence better system management and operation with minimum investment.

2. Personal Impact

• Introduces and acquaints attendees with different components used in protection schemes.
• Ability to perform some basic essential calculations required for relay settings.
• Establishes confidence in dealing with protection schemes installed for protecting personnel equipment to grantee flow of energy.
• Learn how to assess protection performance.
• Add knowledge on how to improve security level by designing better protection systems with aim to improve performance.
• Learn about error sources introduced by some protection scheme components and how to overcome them.

Course  Content

1. Fundamentals of Protection Practice and Basic Technology

• Protective Gear.
• Reliability
• Selectivity
• Speed,Stability and Sensitivity
• Circuit quantities & conventions
• Fault calculations

2. CTs Requirements

• Error in CTs and compensation
• Accuracy limit current of CTs
• Class X CTs and linear CTs
• Transients in CTs
• Practical conditions

3. Static Relays

• Circuits using analogue techniques
• Digital techniques
• Output and Tripping circuits
• Electrical Interference
• Future trends

4. Protection Schemes and substation design diagrams

• Generator protection
• Motor protection
• Transformer protection
• Line Protection
• Substation Design Diagrams

5. Differential protection

• Classification of differential protection
• Direction comparison
• Circulating current and balanced voltage systems
•  Transformer differential protection
• Differential protection for generators and rotating machines
• Line differential protection
• Busbar-differential protection
• Differential system with multiple restraint
• High impedance differential system

6.Industrial Power System Protection

• Busbar arrangement
• Discrimination
• HRC fuses
• Industrial circuit-breakers
• Infeed fault current from induction motor
• Automatic changeover systems
• Voltage and phase reversal protection
• Private generation

7. Installation, testing and maintenance of protection systems

• Installation of protection equipment
• Testing protection schemes.
• Pre-commissioning tests,
• Installation resistance measurements
• Secondary injection tests
• C.Ts tests
• Periodic maintenance
• Setting and testing numerical protection

Electric Power System Protection Instructor 

• Ir.Bledug Kusuma Prasaja,M.T

Time  &  Venue:

• 6 sd 7 November 2018
• Jam   : 08.00 – 16.00
• Tempat :  Hotel Ibis Style Yogyakarta
• Inhouse Training Depend on Request

Facilities

• Module
• Certificate
• Souvenir
• Training Kit

Metode

• Presentation
• Discussion
• Case Study
• Evaluation

Who Sould Attends

This Electric Power System Protection Training Program is suitable for Manager, Supervisor, Group Leader, Section Head, Team Leader : Production, PPIC, Quality, Managers involved with energy management, Electrical engineers and Technical Staff who have to deal with the aspect of electrical and industrial power system protection, control and operation.

Course  Fee  

Public Training
IDR  6,000,000,-/participant/ Nett/Non-Residential
** Pendaftaran minimal 3 orang biaya training Rp. 5,500,000,-/participant nett Non Residential**

Information & Registration

Arum Handayani

arum@centragama.com

0852-3377-1983 (Mobile Phone/WhatsApp)

Nurmasita

nurma@centragama.com

0813-8142-1802 (Mobile Phone/WhatsApp)

CENTRAGAMA INDOVISI

Alamat Kantor : Jl Patangpuluhan No 26 Yogyakarta
Telp : ( 0274 ) 375 734
Fax  : ( 0274 ) 375 734
Email : infotraining@centragama.com 
Website : https://centragama.com

The post Electric Power System Protection appeared first on .

Deskripsi Electrical Equipment Maintenance

Electrical Equipment Maintenance – This course is designed to meet the training needs of plant maintenance personnel engaged in the day-to-day troubleshooting and fault correction of industrial electrical equipment. It is appropriate for electrical maintenance personnel in need of a review of electrical basics and an introduction to more complicated industrial controls and test equipment. It is also suited for mechanical maintenance personnel that take part in plant electrical maintenance activities. The course can be customized to include examples of specific components, test equipment, and documentation found at the plant.

Materi Kursus 

Introduction to electrical equipment maintenance, testing and troubleshooting

• Why maintain and test
• Overview of electrical preventive maintenance and testing
• Planning an EPM program
• Overview of testing and troubleshooting methods
• Review of dielectric theory and practice

Electrical safety, switching practices and precautions

• Introduction
• Electrical fire emergencies
• Effects of electrical shock
• First aid

Direct current voltage testing of electrical equipment

• Direct current voltage testing of insulation
• DC testing methods
• Transformer
• Cable and accessories
• Electrical switchgear and circuit breakers
• Motors and generators
• Evaluation of test data readings
• Precautions when making direct current test

Alternating current voltage testing methods

• Power factor and dissipation factor test methods
• Description of the power factor test equipment
• Basic test connections (test modes) for PF testing
• Safety precautions with PF testing
• PF testing of electrical apparatus insulation

Maintenance of electrical equipment

• Preventive maintenance of transformer
• Transformer testing
• Maintenance of cables
• Cable failures and their analysis
• Electrical switchgear maintenance and care
• Infrared inspection of electrical equipment
• Motor and generator maintenance
• Testing of motor and generator

Peserta 

• Electric Engineer/ Supervisor/ Superintendent
• Power Plant Maintenance Engineer/ Supervisor/ Superintendent
• Power Plant Operation Engineer/ Supervisor/ Superintendent
• Everybody or professional who wants to broaden knowledge or gain Benefit from this course

Instruktur 

Ir. Teguh Santosa (Expert in electrical equiptment maintenance )

Waktu & Tempat 

Tanggal             :

15 – 17 Januari 2019
12 – 14 Februari 2019
12 – 14 Maret 2019
09 – 11 April 2019
14 – 16 Mei 2019
18 – 20 Juni 2019
16 – 18 Juli 2019
06 – 08 Agustus 2019
03 – 05 September 2019
08 – 10 Oktober 2019
12 – 14 November 2019
03 – 05 Desember 2019

Waktu               : 08.00 – 16.00 WIB

Tempat             : Hotel berbintang di Yogya ( Grand Aston/Ibis/ Phonix/ MM UGM )

Fasilitas 

1. Training Module
2. Training CD contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. Jacket or waistcoat or T-Shirt
6. Bag or backpackers
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Once lunch and twice coffeebreak every day of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

INFORMASI

Nurmasita
Email: nurma@centragama.com
Mobile Phone/WhatsApp: 0813-8142-1802

Arum Handayani
Email: arum@centragama.com
Mobile Phone/WhatsApp: 0852-3377-1983

PT. CENTRAGAMA INDOVISI
Alamat Kantor : Jl Patangpuluhan No 26 Yogyakarta
Telp : ( 0274 ) 375 734
Fax  : ( 0274 ) 375 734
Email : infotraining@centragama.com
Website : https://centragama.com

The post Electrical Equipment Maintenance appeared first on .

Tujuan Training Instrumentasi Kontrol dan Otomasi

Peserta pelatihan diharapkan mendapat pengetahuan tentang pengoperasian, pemeliharaan dan perawatan sistem dan juga pengetahuan bagaimana mengukur, memonitor dan mengendalikan besaran-besaran pada proses instrumentasi, kontrol dan otomasi perusahaan

Materi Training Instrumentasi Kontrol dan Otomasi

1. Industrial Data Communication
2. Microprocessor Programming:
3. Image Analysis for Inspection
4. Intelligent Control System
5. Human Machine Interface (HMI)
6. Safety Instrumentation System (SIS)
7. PLC Programming and Operation with Allen-Bradley Controllogix
8. Fundamental Measurement and Instrument
9. Process Control using DCS:
10. Lan Nirkabel Dalam Otomasi Industri & Isa 100.11a
11. Fundamental Process Control

Peserta Training Instrumentasi Kontrol dan Otomasi

• Engineers
• Supervisor
• Teknisi
• Operator, baik junior maupun senior

Pelaksanaan

• Januari
• Februari
• Maret
• April
• Mei
• Juni
• Juli
• Agustus
• September
• Oktober
• November
• Desember

Fasilitas Training Instrumentasi dan Otomasi

• Convinience Meeting room
• Airport pick-up and drop service
• Souvenir
• Sertifikat dari PT Centra Gama Indovisi
• Transportation
• 2x coffee break and lunch
• Training kit

Pendaftaran dan Informasi Hub:

Email: nurma@centragama.com

Mobile Phone/WhatsApp: 0813-8142-1802

PT CENTRA GAMA INDOVISI

Alamat : Jl. Patangpuluhan 26 Yogyakarta
Telephone : (0274) 375734,
Fax : (0274) 375734

Website : www.centragama.com
E-mail : infotraining@centragama.com

The post Training Instrumentasi Kontrol dan Otomasi appeared first on .